Faema BARCODE Gebrauch Und Installation Seite 67

10
S
11
• Place ½ liter of cold water into a container and add a dose of liquid detergent (see product instructions).
• Wash the separte parts, removing any organic residue with a sponge.
• Immerse all mixer parts in the solution (water – detergent) for at least 15 minutes.
• Remove all parts from the solution and rinse.
12
4
Reassemble the parts and attach the mixer to its base.
Note: Take care when reattaching the mixer blade (4) to the pin (P), and make sure the two flat parts on the 2 components
match.
Note: Take care when reattaching the mixer conveyor (3) to water nozzle (H).
13
After the machine has returned to its normal working conditions, simultaneously press the keys (26)
a second to perform a washing cycle.
Downloaded from www.Manualslib.com
Use a brush to clean all the holes where the liquid passes through and clean also
the silicon pipe (S) .
manuals search engine
H
P
65
3
and (28) for at least