Herunterladen Inhalt Inhalt Diese Seite drucken

System Warnings; Check That There Is Water In The Pitcher; Insert The Pitcher; Connect Food Probe - Candy CSO 989 X Installationsanweisung Und Gebrauchsanweisung

Dampfbackofen
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 177

SYSTEM WARNINGS:

The meaning of some warning messages.

CHECK THAT THERE IS WATER IN THE PITCHER

Generally 1L. of water in the pitcher is sufficient for a steam cooking process, nevertheless the
message in question may be displayed for two reasons:
The water in the pitcher has finished.
The pitcher is not inserted completely in its seat.
Open the oven door in both cases, being careful of any steam that may come out.
Add max.1L. of distilled or drinking water, if necessary. (N.B. NEVER fill the pitcher
completely, otherwise the water pumped by the steam generator back into the pitcher, at the
end of the cooking cycle, may overflow from the container.)
Insert the pitcher into its seat.
Push the pitcher down completely to ensure a perfect seal between the tube located in t he
pitcher and the hydraulic circuit inside the oven.

INSERT THE PITCHER

This message is displayed when the system must drain the water contained inside the boiler but the
pitcher is not present in the appropriate seat.

CONNECT FOOD PROBE

This message is displayed upon selection of the low temperature cooking cycle or a personalized
recipe which requires use of the food probe, and only if the latter is not already connected on the
appropriate connector.

DISCONNECT FOOD PROBE

This message is displayed if the setting of the selected recipe does not require the food probe and
only if the latter is connected.

CLOSE THE DOOR

This message is displayed to indicate that the selected process or the process previously in progress
can start only when the door is pr operly closed.
The door -open condition determines the interruption of a cooking process or steam controlled
cycles.

BOILER EMPTYING

WAIT

This indication is used to ensure the user that certain processes are active, monitored and managed
automatically by the system even when the oven is turned off. (E.G. "Boiler wash cycles").
Other indications will be displayed at the end of the process or the oven will turn off automatically.
44

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis