How To Change The Cooking Chamber Temperature; How To Start The Cooking; How To Use The Alarm Function - Candy CSO 989 X Installationsanweisung Und Gebrauchsanweisung

HOW TO CHANGE THE CO OKING CHAMBER TEMPER ATURE
Press one of the two keys
The cooking ch amber temperature is always displayed on the left side of the letter
N.B. The degree symbol
achieved. Otherwise, it is always on in all the other cases, such as for example: temperature control, when
the oven is maintaining the temperature already achieved, and cooling, when the oven must reach a set
temperature lower than the starting value.
HOW TO START THE COO KING
The activation of the selected cooking function, with the sett ings shown on the display, occurs when
the selection is confirmed with key
The following message appears on the display:
N.B. The oven turns off automatically after 5 minutes if the start of the cooking process is not
confirmed.
The phrase COOKING IN PROGRESS
is activated.
Pressing the key
settings or store the data of the cooking in progress. See sectionHOW TO PROGRAM THE
OVEN on page 17.

HOW TO USE THE ALARM FUNCTION

Press one of the two keys
The symbol
ALARM and the digits 00.00 appear.
Use the keys
The maximum time t hat can be set is 23 hours and 59 minutes.
After a few moments (5 sec.), the timer begins, the oven returns to displaying the current time and
the symbol remains constantly lit.
At the end of the set time period, a buzzer sounds and the following message i s displayed:
ALARM
Press any key to stop the buzzer.
Note: The buzzer is automatically deactivated after 5 minutes.
CAUTION:
The alarm function does NOT interact with the operation of the oven, and it is always
available regardless of the oven state.
16
(1) to change, with steps of
° flashes during the oven preheating period until the set temperature is
(9) accesses a menu which allows the user to perform semiautomatic cooking
(4) to activate the function.
begins to flash and the display shows the message:
(4) individually to set the desired time.
00.00 and the symbol
(8).
ACTIVATE CYCLE MENU
MENU will appear on the display when the cooking
(the last two flashing).
5°C, the preset temperature.
+/ -
t
.