8. Operation
Options
• The intensity of the fluorescence can be in-
creased by using the booster lens (Fig. 112) on
the left rear side of the stand (Fig. 113).
If bright fluorescence is required in the center
of the field of view, slide the booster lens into
the receptacle with the marking
• 1.4x
facing the user. If a homogeneous distribution
over the entire field of view is required, turn
the booster lens 180° so that the marking
is facing forward.
• For multiple fluorescence, we recommend us-
ing the Excitation Manager and/or the
ultrafast internal filter wheel. Excitation
wavelengths can thus be changed in
milliseconds. They are controlled by the
function buttons.
Fig. 112 Booster lens
92
0.7x
Fig. 113 Booster lens in stand
1