Connection To The Electronics Box - Leica DMI3000B Bedienungsanleitung

6. Assembly

6.17 Connection to the Electronics Box

CTR4000, CTR6000, CTR6500 or CTR7000
The Leica DMI 3000 B is supplied without an
electronics box. The power supply is integrated
in the stand and a socket has been provided on
the back of the microscope to connect the
transmitted light illumination. The illuminated
ON/OFF switch is located on the stand.
Fig. 77 Rear view of electronics box, example: CTR6000
1 AC power socket
2 XY Stage socket for motorized stage
3 Direct interface socket optional
4 Z Control for separate focus control
5 XYZ Control for SmartMove
6 Microscope socket for microscope
7 12 V, max 100 W for the lamp power cable of stand
8 DL: reset button
8
5
4
3
2
1
58
CTR 4000 Electronics Box
The Leica DMI 4000 B is supplied with the
CTR4000 electronics box. The power supply for
the microscope is located in this box. Two sock-
ets are located on the back of the CTR4000 elec-
tronics box for 12V/100W transmitted light and
12V/100W incident light illuminators. The illumi-
nated ON/OFF switch for the microscope is lo-
cated on the CTR4000 electronics box.
Fig. 78 Rear view of stand
1 RS232 ports
2 2 x USB
3 4 x EXT.
4 XYZ control for SmartMove
5 Electronic box connection
6 Condenser cable
7 Lamp power cable
6
1
7 2
7
6
5
4
3