Leica DMI3000B Bedienungsanleitung Seite 85

8. Operation
All of the user's previous settings are restored
during the initialization.
!
Caution:
The focal position and the lower stop are
also retained from one session to the next
when power is switched off.
After the initialization is complete, the
LeicaScreen will display the status screen
with microscope's current settings. Fig. 107 is
an example.
Fig. 106 LeicaScreen initialization
82
Note: (reset function)
The microscope can be reset to its factory de-
fault programming:
• With the stand switched off, press the top
three variable function buttons on the left side
of the stand.
• Switch on the power for the stand.
• Hold the buttons until the initialization is com-
plete.
• The standard information display will now ap-
pear in the LeicaScreen (Fig. 106 and 107).
• Switch the instrument off and back on. The
settings are now saved.
Fig. 107 LeicaScreen following initialization