Stages And Object Displacement - Leica DMI3000B Bedienungsanleitung

8.10 Stages and Object Displacement

Leica DMI3000 B and Leica DMI4000 B:
The motorized stages are controlled via a sepa-
rate control unit.
Leica DMI6000 B:
Object displacement using SmartMove
The positioning of the stage is controlled by the
knobs (116.1, 116.2) on the SmartMove remote
control module.
Setting the step increments
The positioning speed of the stage can be varied
by switching between the Fast and Precise step
increments.
When selecting Fast, the positioning speed is
the same for all objectives.
The Precise speed varies to suit the current ob-
jective.
Switch between Precise and Fast
via
variable function buttons on stand and
SmartMove
Leica Application Suite (LAS) Software
Fig. 116 SmartMove remote control module
1 travel in x
2 Travel in y
3 Focus
4 Individual adjustment of button height
5 Variable function buttons (factory preset)
Storing and restoring stage positions
A variety of stage positions can be stored tempo-
rarily in the Leica Application Suite (LAS). The XY
position is stored, not the Z position.
In addition to a loading position (Load), 5 stage
positions can be set temporarily. When switch-
ing the microscope on, the stage will travel to a
previously-defined starting position.
Temporarily store and
restore stage positions via
Leica Application Suite (LAS) Software
1
2
8. Operation
3
4
5
101