Display In Sip Server Operation - Yamaha PJP-100H Bedienungsanleitung

Using the SIP Server
■ Calling another unit by dialing the user
ID
You can call the other unit by dialing the user ID if it
consists of only the numbers, *, and/or #.
Example: SIP address of this unit is
200@server1.net, and another unit is
201@server1.net
You can call another unit only by dialing "201".
Notes
• You can call only this unit which belongs to the same domain as
this unit.
• If you want to call another unit which belongs to another
domain, register its SIP address in the address book beforehand
and call by using the address book.
• Press repeatedly to delete the entered number.
38

Display in SIP server operation

Initial display
The SIP address of this unit is displayed in addition to the
information usually displayed (page 7).
Lights up
when using the SIP server
IP: 192.168.0.10
tokyohq@sales.yama...
2006.05. 15 09: 48: 20
Menu :Address
SIP address of this unit
Display during a call
The SIP addresses of this unit and other units are
displayed during the call.
SIP address of this unit
tokyohq@sales.ya...
osaka@sales.yamah...
nagoya@sales.yama...
tokyo@tech.yamaha...
Menu :Address
SIP address of the destination unit
Other displayed information and speaker modes are
identical to those in calls using the IP address (pages 15
and 22).
IP address of this unit