Answering A Call - Yamaha PJP-100H Bedienungsanleitung

Answering a Call

Follow the procedure below to answer a call from another unit.
1
When an incoming call is received, press
When there is an incoming call, the back light of the
display lights up and the ringing tone is generated.
The display shows the IP address of this unit calling
this unit.
IP: 192.168.0.10
192.168.100.10
Menu :Address
y
If the call is made by the PJP unit which is already registered in
the address book, the name registered for this unit is displayed
instead of the IP address.
Note
Do not disconnect the LAN cable or power cable during a call.
Doing so may cause malfunction.
2
To adjust the speaker volume, press VOL +/–.
3
To disconnect the call when the conference
is complete, press
20
Answering a Call
.
.
■ To mute the microphone
When you want to talk about a topic that you do not want
to be heard by the other unit(s) involved in the call, press
MIC MUTE. The microphones of this unit are turned off
while the MIC MUTE LED flashes. To cancel muting,
press MIC MUTE again so that the MIC MUTE LED
turns off.
y
The microphone indicators (blue LEDs) do not light up while the
microphones are muted.
■ To deny the call
When an incoming call is received, press .