Yamaha PJP-100H Bedienungsanleitung Seite 37

■ Conference camera tracking sensitivity
1 2 3
4 5 6
7 8 9
0
MIC MUTE VOL
Use this feature to adjust the sensitivity of the conference
camera tracking.
High: High sensitivity
Standard (Default): Standard sensitivity
Low: Low sensitivity
Using the keys on this unit
In the initial display, select "Menu" → "Settings" →
"General Settings" → "Camera Setup" → "CamTrack
Snstvty".
Using the Web menu
In the Web menu, select "Camera Tracking".
■ Adjusting the LCD contrast
You can adjust the contrast of the display by pressing VOL
+/–.
Using the keys on this unit
In the initial display, select "Menu" → "Settings"
→"General Settings" → "LCD Contrast".
■ Selecting the SNTP server for
synchronization
If you want to adjust the time automatically by
synchronizing this unit with an SNTP server, enter the
name or IP address of the desired SNTP server. See
"Setting the Date and Time" (page 39) for details.
Using the Web menu
In the Web menu, select "Time".
■ Selecting the SNTP synchronization
interval
If you want to adjust the time automatically by
synchronizing this unit with an SNTP server, specify the
synchronization interval in minutes. See "Setting the Date
and Time" (page 39) for details.
Using the Web menu
In the Web menu, select "Time".
■ Setting the time zone
Set the time zone of the region in which the system is
used. The time zone should be set in ±1-hour steps with
respect to the UTC (Coordinated Universal Time).
Using the Web menu
In the Web menu, select "Time".
■ Setting the daylight saving time
If the region in which the system is used applies the
daylight saving time system, set this item to "ON". This
item is usually set to "OFF".
Using the Web menu
In the Web menu, select "Time".
■ Controlling the system using the remote
operation function
This function is reserved for future extension.
Using the keys on this unit
In the initial display, select "Menu" → "Settings" →
"General Settings" → "Remote Control".
■ Selecting the menu language
1 2 3
4 5 6
7 8 9
0
MIC MUTE VOL
(Language)
You can select the language for the display messages.
• English (Default): Select this setting to display the
menus in English.
• Japanese: Select this setting to display the menus in
Japanese.
• Chinese: Select this setting to display the menus in
Chinese.
Using the keys on this unit
In the initial display, select "Menu" → "Setup" →
"General Settings" → "Language".
Using the Web menu
In the Web menu, select "Language".
Setting the Menu List
1 2 3
4 5 6
7 8 9
0
MIC MUTE VOL
33