Calling Another Unit Using The Call History - Yamaha PJP-100H Bedienungsanleitung

Making a Call
3
Press or to select the destination unit,
and then press
The calling display appears.
Online
192.168.0.20
192.168.0.20
:Cancel
The IP addresses of this unit and destination unit
appear if the call is connected by pressing
destination unit and conversation becomes available.
To adjust the speaker volume or disconnect the call,
follow steps 4 and 5 in "Calling another unit by
specifying an IP address" (page 16).
y
If a unit available for communication is already registered in the
address book, the name registered for this unit is displayed
instead of the IP address.
18
.
on the
Calling another unit using the call
history
Follow the procedure below to call another unit by
referring to the history of past outgoing or incoming calls.
Note
If the destination PJP unit obtains the IP address from a DHCP
server, its IP address may be changed from the last call. If your
call cannot reach the destination unit, check the latest IP address
configured at the destination unit.
1
Press in the initial display.
The menu screen appears.
Menu
1. Settings
2. Call History
3. Online
2
Press or to select "2. Call History", and
then press .
The "Call History" menu appears.
Call History
192.168.100.20
Headquarter
Branch A