Changing The Speaker Output Positions According To Locations - Yamaha PJP-100H Bedienungsanleitung

Changing the speaker output
positions according to locations
When the connection mode (page 27) is set to "Mesh" and
the speaker mode (page 29) is set to "Divide", you can
change the speaker output positions according to
locations.
1
Press during call.
The menu screen appears.
Menu
1. Settings
2. Call History
3. Online
2
Press or to select "4. Change location",
and then press
The "Change Location" menu appears.
Change Location
192.168.100.20
192.168.100.30
192.168.100.40
3
Press or to select the IP address of the
destination unit of which you want to change
the speaker output position.
4
Press or to select the speaker output
position.
, and displayed before the IP address
of each location indicate the positions of the speakers
where the audio from respective locations are output.
.
[ ] [#]
Example: when you change the
speaker output position of the
location (top of the list) from the left
to the center.
Change Location
192.168.100.20
192.168.100.30
192.168.100.40
5
Press .
The speaker output position of this unit selected in
step 3 is changed to the position specified in step 4 so
that the positions of other units are also changed.
Talking with Multiple Locations
[ ] [#]
23