Setting The Date And Time; Setting The Time Zone - Yamaha PJP-100H Bedienungsanleitung

The SNTP server (time distribution server) allows the adjustment the date and time information in this unit automatically
at constant intervals.
Notes
• The date and time of this unit cannot be adjusted without an SNTP server. In this case, note that the downloaded call history (page 40)
does not show correct date and time data.
• If the time data cannot be obtained from the SNTP server at the moment this unit is turned on or the designated SNTP server does not
exist at the moment, the time is not displayed on this unit.
• The synchronization with the SNTP server may not be available depending on the security settings of the LAN accommodating this
unit. Using an external SNTP server requires the router settings to be changed, etc. Refer to the instruction manuals for your router for
details.
1
In the Web menu, click "Time".
The "Time" window appears.
2
In the "SNTP Server", enter the name or IP
address of the SNTP server to be used.
3
In the "Synchronization Interval", select the
desired interval for synchronization with the
SNTP server.
4
Click "Submit".
The setting is registered and the top of the Web menu
reappears.

Setting the Date and Time

■ Setting the time zone

Set the time zone of the region in which the system is
used. The time zone should be set in ±1-hour steps with
respect to the UTC (Coordinated Universal Time).
Using the Web menu
In the Web menu, select "Time".
39