Herunterladen Inhalt Inhalt Diese Seite drucken

Configuring The Cascade Settings; Display In Cascade Connection - Yamaha PJP-100H Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Configuring the cascade settings

First configure the setting of cascade server unit, and then
configure the settings of the cascade client units.
■ Step 1. Configure the setting of the
cascade server.
1
Press
in the initial display.
The menu screen appears.
2
Press
or
to select "1. Settings", and
then press
.
The "Settings" menu appears.
3
Press
or
to select "1. Network Settings",
and then press
The "Network Settings" menu appears.
4
Press
or
to select "6. Connection
Mode", and then press
The "Connection Mode" menu appears.
5
Press
or
to select "1. Cascade Server",
and then press
The settings are saved.
Return to the initial display and check that
displayed at the top of the display.
■ Step 2. Configure the settings of the
cascade clients
Follow the procedure in "Step 1. Configure the setting of
the cascade server." above and select "2. Cascade Client"
in step 5.
After completing the setting, return to the initial display
and check that
is displayed at the top of the display.
.
.
.
is
Hierarchical Connection of Multiple PJP Units (Cascade Connection)

Display in cascade connection

The IP addresses of this unit and other units connected to
this unit are displayed during a call.
IP address of this unit
192.168.0.10
192.168.100.20
192.168.100.30
Menu :Address
IP address of other units
The mark displayed before each IP address indicates the
cascade connection mode of each unit.
: This unit is set to "Cascade Server".
: This unit is set to "Cascade Client".
43

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis