Auto Patrol Operation - JVC RM-P2580 Bedienungsanleitung

AUTO PATROL OPERATION

The AUTO PATROL operation consists of high-speed camera movement between multiple pre-set positions,
in a sequence and at time intervals set by the user.
This function can be set on individual cameras.
POSITION display
CAMERA CAMERA
SETUP
POWER
ALARM
MENU MENU SET
KEY LOCK
LENS CAMERA/POSITION
1 2
SPEED
4 5
IRIS IRIS
CLOSE CLOSE OPEN OPEN
FOCUS FOCUS
7 8
NEAR FAR
AF
0
WIDE WIDE ZOOM ZOOM TELE CLEAR
/HOME /HOME
AUTO PATROL button
RM-P2580
REMOTE CONTROL UNIT REMOTE CONTROL UNIT
POSITION POSITION
AUTO F-1 F-2 F-3
PAN/TILT
3
CAMERA CAMERA POSI- POSI-
TION TION
6
OPTION OPTION OPTION OPTION
1 2
9 AUTO AUTO AUTO AUTO
PAN PAN PATROL PATROL
ENTER ENTER
2. BASIC OPERATIONS
1.
Press the AUTO PATROL button. The LED indicator lights
up and the AUTO PATROL operation starts.
The POSITION display shows "
NOTE
During the AUTO PATROL operation, the manual
operation is not available.
2.
To stop the AUTO PATROL operation, press the AUTO
PATROL button again.
NOTES
● The AUTO PATROL operation also stops when a pre-
set position is selected or the AUTO PAN operation
is started.
REF. : [POSITION SELECTION] on Page 11 and
[AUTO PAN OPERATION] on page 14.
● The AUTO PAN operation is set on the CAMERA
SCREEN ( REF. : Page 28). Open the camera menu
screen to perform the setting.
As the rest of the setting procedure is variable de-
pending on the camera models, please refer to the
instruction manual of the connected cameras.
AP
" at this time.
E-15