Camera Selection - JVC RM-P2580 Bedienungsanleitung

2. BASIC OPERATIONS

CAMERA SELECTION

Selecting a Desired Camera
CAMERA display POSITION display
CAMERA CAMERA POSITION POSITION
PO POWER WER
ALARM ALARM
SET
KEY LOCK KEY LOCK
LENS CAMERA/POSITION CAMERA/POSITION
1 2 3
CAMERA
SPEED
4 5 6
IRIS OPTION OPTION
OPEN
FOCUS
7 8 9
AUTO
FAR
AF
PAN
0
ZOOM TELE CLEAR CLEAR ENTER ENTER
/HOME /HOME
CLEAR button - button
ENTER button
Camera operation details
POSITION
Position display
(Example with the
home position)
POSITION
Fixed camera display
E-10
RM-P2580
REMOTE CONTROL UNIT REMOTE CONTROL UNIT
AUTO AUTO F-1 F-1 F-2 F-2 F-3 F-3
PAN/TILT
POSI- POSI-
TION TION
OPTION OPTION
1 2
AUTO
PATROL
+ button
POSITION
AUTO PATROL
( REF. : Page 15)
POSITION
AUTO PAN
( REF. : Page 14)
1.
Press the CAMERA button so that the indicator lights up.
2.
Input the camera number using the numeric keys (0 to 9).
The input figure is shown in the
CAMERA display together with
a period after it. (Example: When
"8" is input)
To clear the input figure, press
the CLEAR button.
3.
Press the ENTER button to enter the input camera number.
CAMERA
The video of the selected camera will be output from the
button
MONITOR OUTPUT connectors on the rear panel.
At this time, the period in the CAMERA display disappears
and the POSITION display shows the camera operation
Numeric key
details (position, fixed camera, AUTO PATROL, AUTO
buttons
PAN, etc.).
NOTE
● "Camera video" is one of the video signals input to
the VIDEO INPUT connector of this unit or to the
switcher, etc.
4.
To view the video of the next camera number, press the +
button. To view the video of the previous camera number,
press the – button.
NOTES
● When no camera is connected to a camera number,
the camera number is skipped.
● Be sure to set each camera ID to the same number
as the corresponding VIDEO INPUT connector. Er-
roneous settings may cause operational difficulties.
CAMERA
Period