Start Heating - Heidolph MR Hei-End Orginal-Betriebsanleitung

Operation

Start heating

➜ Press the heating button.
✓ The ring around heating symbol will
illuminate green.
✓ The unit starts heating
➜ Set temperature in between 3 seconds
using arrow buttons
✓ A heating symbol
display till set temperature is reached
➜ Press button "Select" to adjust heating
temperature.
➜ Press heating button again to switch
off heating.
The device is equipped with a residual
heat warning.
✓ If device is switched off while
temperature is still above 50 °C, the
display will remain illuminated.
✓ A message will be displayed and actual
temperature is shown.
✓ Display will switch off automatically
when temperature lowers to 50° C and
beneath.
p q
and .
will flash in
A power cut will stop heating and mixing and put device on stand
by. Set temperature and speed will be saved.
15
Heating button
Heating symbol