Heidolph MR Hei-End Orginal-Betriebsanleitung Seite 14

Operation
✓ Actual temperature is shown on top of
display.
➜ Press button "Select" once.
✓ An arrow symbol appears at beginning
of first line.
✓ Display changes from "hotplate temp"
to "set hotplate".
➜ Set temperature in between 3 seconds
using arrow buttons
➜ Press button "Select" again in between
3 seconds.
✓ Arrow symbol appears at beginning of
second line.
➜ Set delta for safety temperature
in between 3 seconds using arrow
p q
buttons and
If no entries are made in between 3 seconds the last entry will be
saved and the display switches to show actual temperatures.
Working with temperature sensor Pt 1000:
The display shows "set probe" instead of "set hotplate". Setting
temperature is exactly the same procedure.
p q
and .
.
Delta safety temperature:
14
Set temperature: 100 °C
t 25 °C
Δ