Initial Setup - Beko B40L 5741 4B Handbuch

INITIAL SET-UP
Initial set-up and tuning
channels
The television set is equipped with automatic
channel search, which searches for satellite
channels (DVB-S/S2), terrestrial channels
(DVB-T), cable channels (DVB-C) and analogue
channels.
You start the search and the channels will
be stored into the different Program Tables.
Following, you can sort the channels in the
Program Tables.
The various settings
Depending on the type of antenna connected,
you can decide which channels you would like
the television to search for.
DVB-S/S2 – Tunes digital channels from the
7
satellite, from page 18.
You have two options for this search:
– the basic installation which presets a
standard selection, e.g. the satellite Astra
19.2° East; you need only start the search;
– the professional installation, which allows
you to make all required settings and set
parameters for your receiver system.
DVB-T – Tunes digital terrestrial channels, on
7
page 20.
DVB-C – Tunes digital channels from the
7
cable provider, on page 20.
Tunes analogue television channels, in the
7
chapter "Special functions", starting on
page 70.
Further settings for digital channels after the
7
initial set-up can also be found in the chapter
"Special Settings", starting on page 61.
Note:
Make the language and country selection for
7
all types, then continue reading the respective
chapter.
Television / User Manual
---------------------------------------------------------------------------------------------------
Selecting language, operating
mode and country
1 Switch on the television set from standby
2 Select the menu language with »
3 Select the mode with »
4 Select the country in which the television
8
with » «, »1...0« or »P+ « or »P-«.
– During initial set-up, the »Installation
Guide« will be displayed.
Help:
If this menu is not displayed, restore the
7
television set to its default settings (see
page 54).
» « or » « and press »OK« to confirm.
V Λ
»OK« to confirm.
– The settings used in »Home Mode« help
to save energy.
– Alternatively, the menu item »Shop Mode«
can be selected which the retailer can use
for demonstrating the device functions.
Note:
End the »Shop Mode« by restoring the
7
television set to its default settings (see
page 54).
set is operated with »
and press »OK« to confirm.
– The »Source Setup« menu appears with
the »Connection Type« line marked.
Note:
You can find a description of how to tune
7
the channels of your choice – depending
on the antenna connected – in the
following chapters.
< >
«, » «,
< >
« or » « and press
< >
«, » «, » « or » «
V Λ
EN 80 / 17