Beko B40L 5741 4B Handbuch Seite 146

SETTING FURTHER CHANNELS
Searching for channels from the
cable provider manually
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP«
with » « or »
V
confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
and press »OK« to confirm.
Select the option »Cable« with »
» « or » « and press »OK« to confirm.
V Λ
4 Select » Digital Manual Tuning« with »
or » « and press »OK« to confirm.
Λ
– The menu appears.
5 Enter the four-digit frequency with »1...0«.
– The search starts after confirming, the
channels found are displayed in the
»Results« menu.
6 Press »MENU« to finish the setting.
EN 80 / 68
« and press »OK« to
Λ
« or »
V
<
«, »
-----------------------------------------------------
Searching for digital terrestrial
TV channels automatically
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP«
with »
V
confirm.
– The »SOURCE SETUP« menu appears.
« 3 Select the line »Source« with »
Λ
or » « and press »OK« to confirm.
Λ
>
«, Select the option »Air« with »
or » « and press »OK« to confirm.
Λ
Caution:
«
V
The antenna power supply (line »Active
7
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
supplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably
damage your antenna.
4 Select the line »Active Antenna Power« with
» « or »
V
supply for the antenna with »
(»On«).
5 Select the line »Automatic Channel Search«
with »
V
confirm.
– The menu appears.
Connection Type
Country
Scan Type
« or » « and press »OK« to
Λ
V
<
«, »
«. Switch on the antenna power
Λ
<
« or »
« or » « and press »OK« to
Λ
SOURCE SETUP
AUTOMATIC CHANNEL
DTV & ATV
Exit
Back
Start Search
Television / User Manual
«
>
«, » «
V
>
«
xx.xx.xxxx
15:46
SEARCH
Air
U.K.