Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETTING FURTHER CHANNELS
6 Select the line »Scan Typ« with »
and set the option »DTV« with »
7 Start the scan with » « (red).
– All channel and favourites lists will be
deleted and compiled anew.
Note:
After starting the scan, a security query will
7
appear. Press » « (green) to confirm the
option »Yes«.
– The »Reults« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– The scan is complete as soon as the
»PROGRAM TABLE« appears.
Note:
You can abort the search by pressing
7
»MENU«.
8 Press »MENU« to end the setting.
Searching for digital terrestrial
TV channels manually
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP«
with »
« or »
« and press »OK« to
V
Λ
confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
and press »OK« to confirm.
Select the option »Air« with »
or »
« and press »OK« to confirm.
Λ
Caution:
The antenna power supply (line »Active
7
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
supplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably
damage your antenna.
4 Select the line »Active Antenna Power««
with »
« or »
«. Switch on the antenna
V
Λ
power supply for the antenna with »
>
»
« (»On«).
Television / User Manual
« or »
«
5 Select the line » Digital Manual Tuning« with
V
Λ
<
>
« or »
«.
6 Enter the channel number directly with
7 Press »MENU« to finish the setting.
Automatic service update
If this function is activated, possible changes of
network operators are updated automatically.
The unit must be located in stand-by mode.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP«
3 Select the line »Automatic Service Update«
4 Select the automatic update with »
5 Press »MENU« to end setting.
« or »
«
V
Λ
<
>
«, »
«, »
«
V
<
« or
-----------------------------------------------------
»
« or »
« and press »OK« to confirm.
V
Λ
– The menu appears.
»1...0«.
– After the search is complete, the channels
found are displayed in the »Results« menu.
with »
« or »
« and press »OK« to
V
Λ
confirm.
with »
« or »
«.
V
Λ
>
»
« (»On«).
<
« or
EN 80 / 69
Werbung
Inhaltsverzeichnis
