Film Mode; Firmware-Version; Hardware Version - Beko B40L 5741 4B Handbuch

GLOSSARY
the contract, however may also reduce the
visible brightness levels in the picture.
EN 80 / 76
--------------------------------------------------------------------------------------------------------------

Film mode

Detects and processes feature films
automatically for all channel sources. This
means you will always receive an optimal
picture.
This functions in the modi 480i, 576i and 1080i
in TV playback and for other channel sources.
If the »Film mode« is switched on for
programmes without a feature film signal, minor
problems such as picture freeze, defective
subtitles or fine lines in the picture could occur.
Firmware version
Firmware is the term used for software
that is embedded in a programmed chip
(microcontroller). It is mostly stored in a flash
memory, an EPROM or an EEPROM. The
firmware contains functions for controlling the
device.
Gamma
This setting establishes which brightness
value should be displayed for which digital
transmission value. Most recordings are
transmitted with a gamma value of 2.2 (all
Windows PCs and newer PCs with a MAC
operating system work with this, older MAC
systems and transmissions without colour profile
mostly operate with a gamma value of 1.8).

Hardware version

Hardware in this context means the device.
This includes all components such as processor,
display, etc.
HD
High Definition Television is a general term for
a range of television standards which feature
increased vertical, horizontal or temporal
resolution.
Full HD is a feature of an HDTV capable
device which is able to output or record an HD
resolution of 1920 x 1080 pixels.
JPEG
JPEG stands for Joint Picture Experts Group. It
denotes a process for compressing picture files.
Television / User Manual