Tuning Analogue Television Channels - Beko B40L 5741 4B Handbuch

SETTING FURTHER CHANNELS
Tuning analogue television
channels
This setting is only necessary if you cannot
receive any digital channels and you have not
carried out an analogue search during initial
setup.
The television channels can be set directly or
using the scan.
Switching the television to analogue
reception
Note:
Analogue channels can be selected if the
7
option »Air« or »Cable« has been selected.
1 Open the »Select input source« menu with
» «.
2 Depending on the antenna system, select
the option »Air« or »Cable« with »
< >
» « or » « as the input source and press
»OK« to confirm.
Note:
Additional operations are explained in the
7
following sections.
Setting all analogue television channels
Analogue channels are displayed in the channel
list after the digital channels.
Note:
Plug the rooftop antenna cable (for
7
analogue television channels) into the ANT
IN socket on the television.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP«
with » « or »
V
confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
and press »OK« to confirm.
Select the option »Air« or »Cable« with
< >
» «, » «, »
V
confirm.
EN 80 / 70
«, »
V
« and press »OK« to
Λ
« or »
V
« or » « and press »OK« to
Λ
-----------------------------------------------------
4 Select the line »Automatic Channel Search«
with » « or »
V
confirm.
Source
Automativ Channel Search
Digital Manual Tuning
Analogue Manual Tuning
Program Table
Signal Information
Automatic Service Update
CA - Modul
Active Antenna Power
«,
Λ
5 Select the line »Scan Typ« with »
and set the option »ATV« with »
6 Start the scan with » « (red).
Note:
After starting the scan, a security query will
7
appear. Press » « (green) to confirm the
option »Yes«.
– All channel and favourites lists for the
analogue channels will be deleted and
compiled anew.
– The »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– The search is complete as soon as the
»PROGRAM TABLE« appears.
«
Note:
Λ
You can abort the search by pressing
7
»MENU«.
7 Press »MENU« to end the setting.
« and press »OK« to
Λ
SOURECE SETUP
Air
On
Not inserted
Off
Exit
Back
« or »
V
<
« or »
Television / User Manual
xx.xx.xxxx
15:46
OK
«
Λ
>
«.