Deleting Channels In The Program Table; Change The Order Of The Channels In The Program Table; Sorting Channels In The Program Table - Beko B40L 5741 4B Handbuch

INITIAL SET-UP

Deleting channels in the program table

1 In the »PROGRAM TABLE« menu, select the
Edit mode by pressing » « (red).
2 Select the television channel to be deleted
with » «, »
V Λ
» « (yellow) to delete.
Note:
You can delete all channels with »
7
(blue).
3 Confirm the deletion process with » «
(green);
or
cancel the deletion process with » « (red);
4 Quit the program table with »MENU«.
Change the order of the channels in the
program table
(only satellite channels and digital television
channels from the cable provider)
1 In the »PROGRAM TABLE« menu, select the
Edit mode by pressing » « (red).
2 Select the channel which should be moved
with » «, »
V Λ
with » « (red).
3 Move the channel to its new position with
<
» «, » «, »
V Λ
confirm.
Note:
Repeat steps 2 and 3 if you would like to
7
change other channels.
4 Quit the program table with »MENU«.
EN 80 / 22
---------------------------------------------------------------------------------------------------
< >
«, » « or » « and press
< >
«, » « or » « and mark it
>
« or » « and press »OK« to

Sorting channels in the program table

(only satellite channels and digital television
channels from the cable provider)
You can sort the order of the channels in the
program table according different criteria.
1 In the »PROGRAM TABLE« menu, select the
Sort mode by pressing »
« 2 Select the sort criteria for satellite channels
with » « (red), » « (green) or »
yellow);
or
sort digital channels from the cable provider
with »
3 Quit the program table with »MENU«.
Skipping channels
You can mark channels which should be
skipped when selecting with »
It is still possible to select them using the number
buttons.
1 In the »PROGRAM TABLE« menu, switch
over to the list view with »
2 Select the preferred channel with »
or » «.
Λ
3 Select the column »Skip« with »
and use »OK« to mark the channel.
– The channel is marked by »✔«.
4 Quit the program table with »MENU«.
Note:
Channels can also be reactivated. Select
7
the channel with »
the column »Skip« and reactivate the
channel with »OK«.
« (blue).
« (blue).
« or »
Λ
« (yellow).
<
« or »
« or » «, then select
V Λ
Television / User Manual
«
«.
V
«
V
>
«