Operation Using External Devices; The Digi Link Functions On Your Television - Beko B40L 5741 4B Handbuch

OPERATION USING EXTERNAL DEVICES

DIGI LINK
Your television is equipped with
the DIGI LINK function.
This function uses the CEC
(Consumer Electronics Control)
protocol.
CEC allows external devices which are
connected to the HDMI sockets by an HDMI
cable (e.g. DVD player) to be operated with a
remote control.
Prerequisite is that the devices connected
support CEC. Read the operating manual for the
external device to find out how to activate the
corresponding function.
The DIGI LINK functions on your
television
Switching on the television automati-
cally from standby
If the external device (e.g. Blu-ray player) is
switched on, the television also switches on
and the appropriate HDMI preset is selected
automatically.
Depending on the features of the external
device, the external device (e.g. AV receiver)
can be switched on alone, the television stays in
standby.
Automatic selection of the HDMI preset
on the television
If your television is switched on and you then
switch on the external device (e.g. DVD player),
the appropriate HDMI preset on the television
will be selected.
Selecting the menu language
The television menu language is automatically
selected on the external device (e.g. DVD
player).
The external device must support this function.
Television / User Manual
Switching off the external device
automatically
If you switch your television to standby, the
external device (if it is switched on) will also be
switched to standby.
DIGI LINK is always active on your television
set.
Searching for and activating
external devices
You can connect up to 11 devices with
DIGI LINK functions to your television.
1 Open the Tools menu with »TOOLS«.
2 Select the menu item »CEC« with »
» « and press »OK« to confirm.
Λ
– The »HDMI CEC Device List« appears.
3 Start the device search with » « (red).
– The devices found are displayed in the
menu.
4 Select the device for operation with »
< >
» «, » « or » « and press »OK« to mark
Λ
it.
– If the selected device is connected to a
different input to the current one, a switch
to the respective input will occur auto-
matically.
5 Press »MENU« to end the setting.
------------------------
« or
V
«,
V
EN 80 / 55