Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TIMER FUNCTIONS
Opening the SETTINGS menu
1 Open the menu with »MENU«.
2 Select the menu item »SETTINGS« menu
with »
« or »
« and press »OK« to
V
Λ
confirm.
– The »SETTINGS« menu appears.
SETTINGS
Language settings
Menu
Audio
Subtitle
Subtitle Mode
Hard of Hearing
Date and time settings
Date & Time
Time Adjustment
Exit
Back
Note:
Additional operations are explained in the
7
following sections.
Entering the switch-off time
(sleep timer)
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1 Select the line »Sleep Timer« with »
»
«.
Λ
2 Enter the switch-off time with »
Note:
To switch off the function, use »
7
set the switch-off time to »Off«.
3 Press »BACK < « to go back one menu
level or press »MENU« to end the setting.
Television / User Manual
---------------------------------------------------------------------------------------
Switch-on timer
In the »Auto On« menu you can enter a switch-
on time for the television. After the preset time
has elapsed, the television switches on from
standby – at the preselected volume and the
preselected television channel.
1 Select the line »Auto On« with »
and press »OK« to confirm.
xx.xx.xxxx
15:46
2 Select the line »Mode« with »
and use »
television should switch on.
3 Select the line »Input Source« with »
English
»
English
source.
English
4 Select the line »Service Type« with »
or »
Off
preferred option (ATV, DTV, Radio or DATA).
Off
5 Select the line »Channel« with »
and use »
channel.
Auto
Note:
7
6 Select the line »Volume« with »
and use »
7 Select the line »Set Hour« with »
and enter the time with »1...0«.
8 Save the data with » « (green).
Note:
7
« or
V
9 Press »BACK < « to go back one menu
<
>
« or »
«.
level or press »MENU« to end the setting.
<
>
« or »
« to
<
>
« or »
« to select when the
<
>
« and use »
« or »
Λ
<
« and use »
« or »
Λ
<
>
« or »
« to select the preferred
The line »Channel« is only active when the
input signal currently in use has been set.
If no entry has been made, then the first
channel of the selected input source will be
used.
<
>
« or »
« to set the volume.
You can abort the entry by pressing » «
(red).
« or »
«
V
Λ
« or »
«
V
Λ
« or
V
« to select the input
«
V
>
« to select the
« or »
«
V
Λ
« or »
«
V
Λ
« or »
«
V
Λ
EN 80 / 49
Werbung
Inhaltsverzeichnis
