Changing The Picture Format - Beko B40L 5741 4B Handbuch

TV OPERATION – ADDITIONAL FUNCTIONS

Changing the picture format

Basic setting is 16 : 9.
1 Select the picture format with »
– The picture format (for example »16:9«) is
displayed.
– You can choose between the following
picture formats:
»Auto« format
The picture format is automatically switched to
»16:9« for 16:9 programmes.
The picture format is automatically switched to
»4:3« for 4:3 programmes.
»16:9« and »14:9« formats
For programmes in 4:3 format, the picture is
stretched horizontally if the »16:9« format or
»14:9« format is selected.
The picture geometry is stretched horizontally.
With actual 16:9 input sources (from a set-
top box on the SCART socket) the picture fills
the screen completely and with the correct
geometry.
»4:3« format
The picture is shown in 4:3 format.
»LetterBox« format
The letterbox format is especially suitable for
programmes in 16:9 format.
The black borders which are usually at the
top and bottom of the screen are eliminated,
4:3 pictures fill the screen.
The transmitted pictures are enlarged, but are
slightly cropped at the top and bottom. The
picture geometry remains unchanged.
»Subtitle« format
If you cannot see the subtitles at the bottom of
the screen, select »Subtitle«.
Television / User Manual
»Overscan off« format
In this mode, HD pictures are not cropped by
the HDMI sockets or component sockets, and
«.
are displayed in their original size. This only
applies in HDMI mode and for resolutions of
720p or above.
------------
EN 80 / 31