Disassembly And Inspection - TLV COSR-3 Einbau- Und Betriebsanleitung

6. Disassembly and Inspection

It is a recommended practice to dismantle and inspect the COS/COSR once a year for preventive
maintenance purposes. It is especially important to do so immediately after the initial run of a new
line or before or after the equipment is out of service for a long period of time.
COS
The size and shape of some COS and COSR parts for large valve sizes will be different from
those shown.
Adjustment Section
Pilot Section
Pilot Cover
1
/
(65 - 100 mm; 2 " - 4")
2
see page 17
Piston Section
Separator/
Main Valve
Section
Steam Trap
Section
― 15 ―
COSR
Adjustment Section
Pilot Section
Pilot Cover
(65 - 150 mm; 2
see page 17
1
/
" - 6")
2
Piston/
Main Valve
Section
Cover / Plug