Configure the language of the telephone (see
Configure a SIP account for an Auerswald PBX manually (see
Configure a SIP account for a VoIP provider (see
Automatic Configuration (Provisioning Server)
Requirements
–
For operation on an Auerswald PBX: Auerswald PBX COMpact 3000
analog/ISDN/VoIP, COMpact 4000, COMpact 5000/R, COMpact 5010
VoIP, COMpact 5020 VoIP or COMmander 6000/R/RX with the following
features:
i
i
–
For operation on a VoIP account:
i
–
VoIP provider specific settings, if required
–
Provisioning file (*.xml) stored on the provisioning server
Connect the COMfortel 1200 IP (see
•
Configuring the language
Press the menu key and open the menu Language.
1.
Scroll to the required language and press the OK key.
2.
COMfortel 1200 IP - Setup V03 09/2016
Available internal VoIP channels
Configured SIP subscribers (internal telephone number, user name,
PIN/password
Configured SIP subscribers (telephone number, user name, PIN/pass-
word
During the automatic configuration, the telephone requests the provi-
sioning file from the provisioning server.
Subsequently, the telephone starts up and logs on to the PBX or VoIP
provider. If the registration is performed successfully, the
will appear on the screen. The telephone is now ready for use.
You will find further information about the provisioning process on the
Internet (see
www.auerswald.de/service
Commissioning
page
43)
page
46)
page
41).
under Developer).
page
44)
symbol
43