Faults; Cleaning And Disinfection; Disinfection - Wellsystem RELAX_PLUS Original-Gebrauchsanweisung

08/2016 1009864-02A
4.2

Faults

Error codes are output to the display to simplify troubleshooting:
If an error occurs, the error code flashes on the display.

If several errors occur, the error messages are displayed alternately.

NOTE:
Certain error messages can be switched off by pressing the
START / STOP button.
In other cases the error can be eliminated by switching the
device off for 1 minute (switch off using the main switch / the
fuse).
Inform our customer service department if the same error code is dis-

played again after pressing the START / STOP button or switching the
device back on – see page 2.
More detailed information regarding the error description and solutions can be
found in 'Error Codes', (order no. 801290-..).
4.3

Cleaning and disinfection

DANGER!
Infections can be spread by skin contact!
All objects / device parts touched by the user during use
must be disinfected after every use:
– Handle
– Control panel
– Rubber blanket
– Frame
– Headrest
4.3.1

Disinfection

NOTE:
Adhere to the stipulated times to ensure thorough disinfec-
tion. Follow the manufacturer's instructions for use.
Cleaning and maintenance
Operating instructions – 37/46