Safety instructions and warnings
14/46
1.5.6
Operation and maintenance
Error-free operation, maintenance and service are required in order to ensure
that the health and safety of the users is not endangered during operation and
to ensure that the device is in a fault-free operating condition.
Always abide by the information and recommendations given in this operating
manual. Please ensure that the intervals for the inspection, maintenance and
service are complied with. Maintenance work must be carried out in accord-
ance with the checklist supplied by our customer service department.
Unauthorized modifications and changes to the device and its control unit are
prohibited. Failure to comply with this voids the operating licence!
To avoid hazards, the device must not be used if the mains power cable is
damaged. A damaged mains connection cable must be replaced immediately.
1.5.7
Decommissioning
The device must be disconnected from the power supply in order to tempo-
rarily or permanently decommission it.
You must abide by the legal disposal requirements when permanently de-
commissioning the device.
1.5.8
Storage
Store the devices in a dry, frost-free location with a stable temperature. The
well, pump and the hoses must not contain any water. Once the device has
cooled off, pack it in plastic wrapping to protect it against scratches.
Storage temperature: Between -15 °C and +60 °C
1.5.9
Disposal
Environmental regulations – disposal of batteries
Batteries contain heavy metal compounds.
Within the European Union the national implementation of the Waste Frame-
work Directive 2008/98/EC applies. According to the national waste disposal
laws and in accordance with the community waste regulations, proof must be
provided of the proper disposal of batteries.
Operating water disposal
The device is filled with normal tap water without additives. The water can be
drained off into the public sewage system after it has been used.
Packaging
All packaging consists of 100 % recyclable materials. Packaging brought into
circulation by the JK Corporate Group that is no longer required can be re-
turned to the JK Corporate Group. Your partner agency or dealer will be hap-
py to advise.
Disposal of old devices
The device has been manufactured using recyclable materials. The JK Corpo-
rate Group will provide you with information on the content or potential haz-
ards of the materials used.