Starting A Massage; Using A Chip Card To Start - Wellsystem RELAX_PLUS Original-Gebrauchsanweisung

Operation
28/46
Function
16 Upper body button
17 Lumbar area button
18 Speed button (nozzle carriage)
19 Massage pressure button
3.3

Starting a massage

NOTE:
If and how the massage time can be selected depends on
the presettings – see page 42.
– Setting the massage time – see page 34.
– Lie down on the unit. In doing so place your head on the positioned head-
rest.
– Select the type of massage that you want and then press the START /
STOP button.
NOTE:
The zone or point massage selection only functions when
the nozzles are moving from the head end to the foot end.
If you have missed the right moment:

First select whole body massage again.

Wait until the nozzles reach the desired position while
moving from the head end.

Press zone or point massage.
NOTE:
The cooler in the base of the device is switched on and off
automatically whilst the device is being used.
3.3.1

Using a chip card to start

A set of chip cards loaded with 3 additional massage programs is available as
an accessory – see page 30.
NOTE:
If and how the massage time can be selected depends on
the presettings – see page 42.
Information
Massage area
Massage area
Speed levels
min. 0.5, max. 3.75