Variable Settings - Wellsystem RELAX_PLUS Original-Gebrauchsanweisung

Operation
34/46
3.8.2

Variable settings

Massage time, massage pressure, speed and body size settings
Operating Settings /
button Display
START / STOP button
Massage time display
Altering the massage
time,
e.g. from
Altering the
massage pressure,
e.g. from
Remarks
The device switches on.
After starting:
The variable settings can be defined
separately for the specific massage
areas and the the massage types,
e.g.:
1. Step (massage area):
Whole body button
2. Step (massage type):
Parallel massage
Press the massage time button and
hold down for approx. 1 s. The display
will flash. Press the plus or minus
buttons to set up the value that you
want.
to
Basic setting:
Changes can only be made using the
service card in the default settings
mode.
Factory setting: 30 minutes
Minimum and maximum massage
times in minutes:
5.00 to 45.00 in minutes
Press the massage pressure button
and hold down for approx. 1 s. The
display will flash. Press the plus or
minus buttons to set up the value that
you want.
to
Basic setting:
Changes can only be made using the
service card in the default settings
mode
Factory setting: 1.50
Minimum and maximum massage
pressure:
0.5 to 3.75 in 0.25 intervals