Troubleshooting - Reely 1527787 Bedienungsanleitung

12. Troubleshooting

Even though the model and the remote control system were built to the state of the art, there may still be malfunctions
or faults. For this reason, we would like to give you some information on how to deal with possible problems.
Problem
Transmitter doesn't respond.
The LED of the operating control
display is only lightly lit.
The charge indicator display at the
helicopter goes off again quickly.
The charge control display in the
helicopter does not light up.
Rotors do not start.
Helicopter does not lift off the ground.
Helicopter does not react to control
commands.
Helicopter rotates around the yaw
axis (rotor shaft).
The flight time is too short.
36
Remedy
• Check the batteries in the transmitter.
• Check the polarity of the batteries in the transmitter.
• Check or replace the batteries in the transmitter.
• The flight battery in the helicopter is already charged.
• The batteries in the transmitter are too weak.
• The flight battery in the helicopter is already charged.
• The model helicopter has not been put onto the charging socket of the
transmitter properly.
• Check flight battery charging state.
• Check ease of movement of the mechanics.
• Repeat switching on.
• Check flight battery charging state.
• Check ease of movement of the drive mechanics.
• Rotor blades defective.
• Interferences from solar irradiation, strong light sources or other IR
transmitters like wireless IR headphones.
• Trimming in the model (see figure 10).
• Repeat switching on and ensure that the helicopter is not moved or
rotated.
• Check ease of movement of the drive mechanics.
• Recharge flight battery.
• Mechanics catch.