Auerswald COMpact 4000 Anleitung Seite 27

Internal S
Connection unit
Connection type
Supply voltage
Feeder
Range
Terminators
Internal U
Connection unit
Connection types
Range
Supply voltage
Feeder
External S
Connection unit
Connection type
Range
Terminators
COMpact 4000 - Firmware V6.4 - Setup V02 07/2015
Port
0
Spring clamp connection (4-core),
optionally RJ-45 socket
S basis access as Point-to-Multipoint connection,
0
EURO-ISDN (DSS1), short passive bus
40 V +5 % / -15 %
Max. 4 W
Max. 150 m with typical telephone or network cable
(twisted-pair) for bus setup; European standards
ENV 41001 [DINV 41001] and EN 28877 apply to
IAE-termination technology)
100 Ohm, switchable; factory settings on
Port
P0
Spring clamp connection (2-core),
optionally RJ-45 socket
U
P0
per port, direct connection to a U
the U
Screened cable: up to 600 m
Unscreened cable: up to 1000 m
40 V +5 % / -15 %
Max. 4 W
Port
0
Spring clamp connection (4-core),
optionally RJ-45 socket
S basis access as Point-to-Multipoint connection or
0
as a Point-to-Point connection, EURO-ISDN
(DSS1), unit is powered locally
Max. 150 m with typical telephone or network cable
(twisted-pair
100 Ohm, switchable; factory settings on
Important Information
with Euro-ISDN protocol (DSS1); 2 B-channels
/S adapter
P0 0
telephone or to
P0
27