Cleaning And Care; Troubleshooting - Silvercrest SNWD 1000 A1 Bedienungsanleitung

Cleaning and Care

IMPORTANT
Ensure that no fluids can enter the scale!
This could irreparably damage the appliance.
Do not use abrasive or solvent cleaners.
These could damage the surfaces.
■ Wipe the scales using a cloth lightly moistened with mild soapy water and
then wipe dry with a lint-free cloth.

Troubleshooting

In this chapter you will receive important information for malfunction localization
and remedies. Observe the instructions in order to avoid danger and damage.
Observe the following safety information to avoid danger and property damage:
► Repairs to electronic appliances may only be carried out by specialists
who have been trained by the manufacturer. Considerable danger to the
consumer and damage to the appliance can occur as a result of incorrect
repairs.
The following table will help with localizing and remedying minor malfunctions:
Display
The output in the
display becomes
unreadable.
No output in the
display .
"E- - - -" appears in the
display .
NOTICE
► If you cannot resolve the problem with the above steps, please contact
Customer Support.
SNWD 1000 A1
WARNING
Possible cause
The batteries are very low.
The plastic strip in the
battery compartment
has not been removed.
The batteries are
discharged.
The permitted maximum
weight of 5 kg or 11 lb is
exceeded.
Remedy
Replace the batteries.
Remove the plastic strip from
the battery compartment
Replace the batteries.
Remove a little weight from the
scale.
GB │ IE │ NI
.
│ 13 ■