Displaying Added Measured Values; Deleting Measured Values; Saving Personal Codes - Silvercrest SNWD 1000 A1 Bedienungsanleitung

Displaying added measured values

You can call up added measured values at any time.
1) Touch the MR
the display
2) If you do not press any other button for about 10 seconds, the scales will
return to weighing mode.

Deleting measured values

Touch the MC
display of the last weighing number goes out, all measured values are deleted.

Saving personal codes

You can enter the nutritional and energy values for further foods, assign a code
to these and save them in memory entries 800–999 (empty at delivery). The
values you enter each refer to 100 g of food.
You can find the nutritional values of foods on their individual packaging or in
specialist literature.
Proceed as follows:
1) Touch the on/off
The start display appears briefly, then " 0 g" is shown automatically.
2) Touch the MR
until "Code 800" flashes in the display
3) Use the number buttons
which you wish to save the nutritional and energy values for a new food.
4) Confirm your code number entry by touching the MR
display is now displayed permanently and
the value for the kilocalories using the number buttons
5) Confirm your entry by touching the MR
Enter the value for the fat content in grams using the number buttons
6) Confirm your entry by touching the MR
Enter the value for the carbohydrates in grams using the number buttons
7) Confirm your entry by touching the MR
Enter the value for the protein content in grams using the number buttons
8) Confirm your entry by touching the MR
display. Enter the value for the cholesterol content in milligrams using the
number buttons
9) Touch the MR
values.
SNWD 1000 A1
button. The totals of all saved measured values appear in
for about 10 seconds.
button if you wish to delete the saved measured values. The
button to switch on the scales.
and unit buttons simultaneously for about 3 seconds
to enter a code between 800 and 999, under
.
button to complete entry of the nutritional and energy
.
button. The code
flashes in the display. Enter
.
button. flashes in the display.
button. flashes in the display.
button. flashes in the display.
button. flashes in the
GB │ IE │ NI
.
.
.
│ 11 ■