Changing The Battery; Measuring Jug Scale; Troubleshooting; Cleaning And Care - Silvercrest IAN 330794 1907 Bedienungs- Und Sicherheitshinweise

m
CAUTION! Do not – especially
when using the tare function – exceed
the maximum permitted weighing
value . Otherwise, the product may be
damaged .
˜ Changing the battery
Replace the battery as soon as "Lo" is
displayed or if the product cannot be
switched on anymore .
Loosen the screw of the battery
compartment cover 8 , using a
screwdriver .
Remove the battery compartment
cover 8 .
Remove the used button cell .
Insert a new CR2032 button cell . The
positive pole (+) must point outwards .
Replace the battery compartment
cover 8 .
Secure the battery compartment
cover 8 with the previously loosened
screw .
˜ Measuring jug scale
Using both scales on the measuring jug 1 ,
the approximate amount of cups or the
volume in millilitres (ml) and fluid ounces
(fl'oz) can be read without switching the
product on .
26 GB/IE
˜ Troubleshooting
If "Err" is displayed instead of a measured
value, the maximum permitted weighing
range has been exceeded . In this case,
immediately remove the foodstuff items
from the measuring jug 1 . Separate the
foodstuff into several portions and then
weigh the portions individually .
˜ Cleaning and care
For hygienic reasons, clean the product
after each use .
m
WARNING! Do not immerse the
electrical parts of the weighing unit 3
in water or other liquids . Never hold it
under running water .
Part Cleaning
Measuring 1 Clean in a dishwasher or
jug by hand under running
water (if needed, use a mild
detergent) .
Weighing 3 Wipe with a slightly
unit moistened cloth .
Do not use abrasives, harsh cleaning
solutions or hard brushes for cleaning .
Let all parts dry afterwards .