First Use; Setting Up; Operation; Weighing Items - Silvercrest SNWD 1000 A1 Bedienungsanleitung

First use

■ Remove all packaging materials from the appliance. Remove the protective
film from the display
■ Open the battery compartment
AAA batteries in the battery compartment (ensure correct polarity!). Close
the battery compartment
cover clicks firmly in place.
■ The scales can display weights optionally in g (grams) or oz (ounces) and
lb (pounds). Touch the unit
g (grams) is always shown as an example in these instructions.

Setting up

Place the scales on a level, firm surface. Correct measurement requires a firm
base, as the weight sensors are installed in the 4 silicone feet
NOTE
► This appliance is provided with non-slip silicone feet
may be made of a variety of materials and are treated with many different
types of cleaning agents. Therefore, it is not possible to entirely exclude
the possibility that some of these materials contain substances that could
corrode and soften the appliance's silicone feet
anti-slip mat under the silicone feet

Operation

Weighing items

1) Touch the on/off
briefly, then " 0 g" is shown automatically.
CAUTION
Excess or incorrect loads will cause irreparable damage to
the appliance.
► Never place food weighing more than 5 kg (11 lb) on the weighing
plate
scales.
► Do not place any objects or food on the display
■ 8 │ GB │ IE │ NI
.
again, making sure the battery compartment
button to change the unit of weight. The unit
button to switch on the scales. The start display appears
. In cases of doubt, first weigh heavy food using more sturdy
on the underside of the scales. Insert the
. Furniture surfaces
. If need be, place an
of the appliance.
or the buttons.
.
SNWD 1000 A1