C) Activating Setting Mode - Conrad WS 1173 Bedienungsanleitung

c) Activating Setting Mode

Various basic settings are possible in the setting mode. The time and date can be entered
manually here as well if no DCF reception is possible.
The following functions are available:
• Setting the Time Zone
• Selecting 12/24 h mode
• Manually setting the time (hours/minutes)
• Manually setting the date (year/month/day)
• Selecting temperature unit (°C, °F)
• Calibrating indoor humidity
• Calibrating outdoor humidity
• Selecting unit of the barometric pressure ("hPa" or "inHg")
• Calibrating barometric pressure
• Setting barometric pressure steps for weather forecast (default 2 hPa)
• Setting barometric pressure steps for weather icon "Storm" (default 4 hPa)

The setting mode is started by pushing the button "SET" for two seconds. The weather
station then emits a sound signal.
Briefly pushing the button "SET" takes you to the respective next setting.
Use the button "+" or "MIN/MAX" to change the set value. Keeping the respective
button down for some time will adjust quickly.
Leave the setting mode by briefly pushing the button "SNOOZE/LIGHT" or make the
last setting (alternatively wait for 10 seconds without pushing any button).
Proceed as follows:
• Hold down the button "SET" for 2 seconds. The time zone flashes.
Use the button "+" or "MIN/MAX" to adjust the time zone in the area of +12 to -12 hours.
• Briefly push the button "SET"; "24H" or "12H" flashes in the display.
Use the button "+" or "MIN/MAX" to switch the display 24 h and 12 h mode. In 12h mode, "PM"
is displayed to the left of the time in the second half of the day.
44