Weather Station Operation; A) Displaying The Outdoor Or Dewpoint Temperature; B) Displaying The Relative/Absolute Barometric Pressure - Conrad WS 1173 Bedienungsanleitung

12. Weather Station Operation

a) Displaying the Outdoor or Dewpoint Temperature

• Briefly push the button "SET"; the outdoor temperature flashes.
• Use the button "+" or "MIN/MAX" to select between:
"TEMP"
"DEW POINT"

The dewpoint is the temperature to which condensate just starts to form on an object.
• Briefly press the button "SET" to get to the barometric pressure display selection; (see
chapter 12. b).
To leave the selection menu, either briefly push the button "SNOOZE/LIGHT" on the top of
the weather station (alternatively wait for 10 seconds without pushing any button).

b) Displaying the Relative/Absolute Barometric Pressure

• Briefly push the button "SET"; the outdoor temperature flashes (see chapter 12. a).
• Briefly push the button "SET" again; the barometric pressure flashes.
• Use the button "+" or "MIN/MAX" to select between:
"rel"
"abs"

The absolute barometric pressure is the actually measured barometric pressure. It
depends on the altitude of your place of residence.
The relative barometric pressure is converted to sea level to get comparable values.
The data you will receive, e.g., online, are always indicated like this.
To display the correct data, the relative humidity can be corrected in the setting mode,
see chapter 12. c).
• To leave the selection menu, either briefly push the button "SNOOZE/LIGHT" on the top of
the weather station or the button "SET" (alternatively wait for 10 seconds without pushing any
button).
Outdoor temperature
Dewpoint temperature
Relative humidity
Absolute humidity
43