b) Inserting and Connecting the Drive Battery
Figure 6
• Lift the canopy off as described in chapter 8. b).
• The drive battery (1) is inserted into the fuselage of the bat into a dedicated battery holder (2) and secured against
the battery holder with a rubber ring (3).
• Switch on the transmitter. The control levers of the transmitter must be in the neutral position.
• Place the boat on a suitable surface so that the ship's propellers can move freely.
• Connect the plug connections (5) on the control electronics to the counter-piece (6) of the speed controller.
Observe that the cables cannot enter turning drive parts (4).
33