Replacing The Ship's Propellers - Reely Mini Wavebreaker Bedienungsanleitung

10.

Replacing the Ship's Propellers

The delivery includes a left-turning and a right-turning replacement ship's propeller each. Before replacement, obser-
ve the different propeller shapes of the ship's propellers as shown in figure 8.
Proceed as follows to replace the ship's propellers:
• Remove the safety nut. For the left ship's propeller, you need to turn the nut to the left to remove it. For the right
ship's propeller, you need to turn it to the right. For this, hold the respective motor shaft by the rear nut of the ship's
propeller with suitable pliers.
• Remove the ship's propeller from the shaft.
• Install the new ship's propeller on the shaft and secure it with the lock nut.
At installation of the ship's propellers, always observe the propeller shapes shown in figure 8. Installing
the ship's propellers incorrectly causes the model to run in circles (or the to run backwards instead of for-
wards).
Figure 8
37