Other Functions (Menu); Deleting Saved Values Automatically (Aclr); Saving Additional Weight Permanently (Pt) - Seca 685 Bedienungsanleitung

6.4

Other functions (menu)

Deleting saved values
automatically (ACLr)
Saving additional weight
permanently (Pt)
2
60 • seca 685
Out-of-date measuring results lead to incorrect calculation of BMI. You can set the de-
vice so that the measuring results are deleted automatically after 5 minutes.
NOTE
This function is activated at the factory on some models. The function can be
deactivated.
1. From the menu, select the
2. Confirm your selection.
ð The current setting is displayed.
3. Select the desired setting:
– On
–
OFF
4. Confirm your selection.
ð The menu closes.
The function is suitable for patients who are not mobile and need to be
Pre-Tare
weighed in a wheelchair, for example. You can save the unladen weight of the wheel-
chair independently of a weighing procedure. During the weighing procedure, you can
call up the unladen weight of the wheelchair and have it automatically deducted from
the measuring result.
The device has three memories for weight values. You can save various weight values
and call them up individually depending on the initial situation, so that they are automati-
cally deducted from the measuring result.
1. From the menu, select the
2. Confirm your selection.
ð The last memory used is displayed.
PT 3. You have the following options for continuing:
► Adopt memory
► Select different memory: Press the
4. Confirm your selection.
ð Arrows flash in the display.
ð The additional weight saved to the selected memory is displayed.
5. You have the following options for continuing:
► Adopt value
► Change value: Press the
NOTE
When you enter the value
longer shown in the display.
6. Confirm your selection.
7. Move the patient onto the scale.
ð The patient's weight is displayed.
ð The saved additional weight has been deducted automatically.
8. To deactivate the function, select the
9. Confirm your selection.
ð The function is deactivated.
ð The menu closes.
NOTE
When you switch the scale off, the function is switched off. The message
longer displayed when you switch the scale on again.
menu item.
ACLr
menu item.
Pt
or the key
or the key
, the function is switched off. The message
0
menu item from the menu again.
Pt
is no
Pt
is no
Pt