Fitting The Rail; Fitting The Bottom Cross-Piece - Seca 685 Bedienungsanleitung

English
You need the following connecting elements for this assembly step:

Fitting the rail

8x M6 x 16 8x white
1. Put the rail on the uprights of the side parts.
2. Fasten the rail using two screws per upright (5 Nm).
3. Put the white caps on the screws.
Fitting the bottom cross- You need the following connecting elements for this assembly step:
piece
4x M8 x 20 4x ø 8.4
1. Put the bottom cross-piece on the side parts.
2. Ensure that the bores in the cross-piece and the bores in the side parts are in line
over one another.
3. Fasten the cross-piece using two screws per side part (10 Nm).
Starting up device • 51