Other Functions (Menu); Deleting Saved Values Automatically (Aclr); Saving Additional Weight Permanently (Pt) - Seca 645 Bedienungsanleitung

6.2

Other functions (menu)

Deleting saved values
automatically (ACLr)
Saving additional weight
permanently (Pt)
2
Out-of-date measuring results lead to incorrect calculation of BMI. You can set the de-
vice so that the measuring results are deleted automatically after 5 minutes.
NOTE
This function is activated at the factory on some models. The function can be
deactivated.
1. From the menu, select the
2. Confirm your selection.
ð The current setting is displayed.
3. Select the desired setting:
– On
–
OFF
4. Confirm your selection.
ð The menu closes.
Use the function to save an additional weight permanently and have it de-
Pre-Tare
ducted from a measuring result automatically. For example, you can save a flat-rate fig-
ure for shoes and clothing and then always deduct this from the measuring result if a
patient is weighed fully clothed.
The device has three memories for weight values. You can save various weight values
and call them up individually depending on the initial situation, so that they are automati-
cally deducted from the measuring result.
1. From the menu, select the
2. Confirm your selection.
ð The last memory used is displayed.
PT 3. You have the following options for continuing:
► Adopt memory
► Select different memory: Press the
4. Confirm your selection.
ð Arrows flash in the display.
ð The additional weight saved to the selected memory is displayed.
5. You have the following options for continuing:
► Adopt value
► Change value: Press the
NOTE
When you enter the value
longer shown in the display.
6. Confirm your selection.
7. Ask the patient to step onto the scale.
ð The patient's weight is displayed.
ð The saved additional weight has been deducted automatically.
8. To deactivate the function, select the
9. Confirm your selection.
ð The function is deactivated.
ð The menu closes.
NOTE
When you switch the scale off, the function is switched off. The message
longer displayed when you switch the scale on again.
menu item.
ACLr
menu item.
Pt
or the key
or the key
0 , the function is switched off. The message
Pt menu item from the menu again.
English
Pt is no
Pt is no
Operation • 59