Troubleshooting - Dantherm Rcv320 P1 Übersetzung Der Originalanleitung

Troubleshooting

Error signals
Error list
52
In this section you will get to know how to detect and correct possible operating errors.
Dantherm strongly recommends to connect a remote control to the unit for operation in
order to perform proper troubleshooting.
Occurring errors are indicated in various ways:
Component
Ventilation unit
Hand-held remote
control
Wired remote control
(HCP 10/11)
PC Tool
Smartphone APP
How to read the error list:
Column Description
A Number of flashes in the display (wired remote
control)
B LED for filter reset on the ventilation unit
C Acoustic signals
Error code Error number indicated on the display of the
hand-held remote control, the smartphone app or
in the PC Tool
INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
Maintenance and troubleshooting: Troubleshooting
Signal
Acoustic signal from the main PCB. Connect a remote control or
the PC Tool to indicate the specific error.
LED for filter reset
Audible signal and indication of a specific error code.
Acoustic signal and flashing LED:
The number of flashes corresponds to an error code, followed by
a 5 second break. See error list.
Indication of the error number as well as the option to indicate a
log of specific operations covering a longer period of time.
Indication of a specific error code.
Code Meaning
- -
Y Yellow LED
flashes
R Red LED flashes
0 No acoustic
signals
1 One acoustic
signal/hour
2 One acoustic
signal/sec
- E.g., "E12" stands
for error number
12.