Dantherm RCV320 P1 Übersetzung Der Originalanleitung Seite 20

Airflows
20
The unit offers the possibility to swap the directions of the airflows so that there are two
operating modes:
• Mode A
• Mode B
The inputs and outputs of the airflows in the two operating modes are depicted in the follow-
ing figures:
By default, the ducts on the side and bottom of the unit are closed but can be opened and
used as shown below. When opening the ducts on the side or on the bottom, the correspon-
ding ducts that are not used are usually closed. If required, two corresponding ducts can be
used simultaneously.
The standard operating mode is mode A.
Fig. 9: Airflows in mode A
Fig. 10: Airflows in mode B
Colour (arrows) Designation of the airflow
Green T1
Red T2
Yellow T3
Brown T4
INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
Product description: Scope of delivery and unpacking
Description
Outside air
Supply air
Extract air
Exhaust air