Dantherm RCV320 P1 Übersetzung Der Originalanleitung Seite 25

INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
Product description: Accessories
Wired remote con-
trol (HCP 11) unit is difficult to reach due to the location of the unit. The remote control provides the same
functions as the control unit.
Fig. 15: Wired remote control HCP 11
Accessory control
A variety of accessories can be connected to the unit via the accessory control HAC 2.
(HAC 2)
Fig. 16: Accessory control HAC 2
VOC, humidity and
The unit can be equipped with a VOC (volatile organic compounds) sensor, a humidity sensor
CO₂ sensor
(RH %) and/or a CO₂ sensor.
These sensors provide a continuous quality control of the indoor air and adjust the airflow
accordingly, which results in sufficient ventilation with the lowest possible electrical power
consumption. This operating mode is called demand-controlled mode. If an HRC remote con-
trol is connected, the level is indicated on the display with the level 3 symbol.
A demand-controlled operation ensures the desired ventilation performance with the lowest
possible power consumption.
Fig. 17: Humidity sensor (left), VOC sensor (centre) and CO₂ sensor (right)
A wired remote control HCP 11 (without display) can be connected to the unit if the control
25