Dantherm RCV320 P1 Übersetzung Der Originalanleitung Seite 43

INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
Installation: Assembly
2.
Fig. 46: Condensate drain for operating mode A and B
3.
Fig. 47: Connecting the condensate drain hose
4.
Fig. 48: Fitting the plug on the condensate drain
Check to which drain (A/B) the condensate drain must be connected. The process is de-
picted in the following figures.
1
1. Condensate drain for operating mode B
Remove the plug of the drain to be used. Then connect the condensate drain hose and
secure it with the hose clamp provided. Do not use a screw clamp.
Ensure that the other condensate drain (1) is closed with a plug (2).
1
2
2
2. Condensate drain for operating mode A
43